HERO 100

HERO 100 

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The HERO 100 Waterjet Intensifier Pump, with Jet Smart Controls provides the power to drive greater water volumes at Ultra High Pressure. Teamed with a Jet Edge motion system, multiple cutting heads can be configured for both waterjet cutting and abrasive waterjet cutting.

Jet Edge allows you to Custom Configure your Intensifier Pump to match your unique application with the best value. If you require an engineering analysis to proof your processing goals, request a  Free Application Analysis.

Jet Smart Controls make the user interface simple. Quickly set pump pressures, visualize intensifier cycles, receive performance feedback in real time and receive prompts for scheduled maintenance.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 2.1 gpm (7.9 lpm)
  • Max rated orifice size 0.021 in (0.53 mm)
  • Two single piston, dual plunger intensifiers
    with tie rod design
  • Motor output: 100 hp (75 kw)

Category:

Description

CONSTRUCTION

  • Heavy-gauge sheet metal covers
  • Rugged all-steel welded framework
  • Hinged cover & quick-remove access covers
  • Sound Insulating Kit

JET SMART CONTROLS

  • Interactive Controls Touch Screen
  • Maintenance schedules with prompts
  • Remote pump start
  • Wye-Delta Motor Starter with optional Soft Start motor starter
  • Dual pressure set points
  • Manual pressure control with Soft Start accumulator
  • Leakage water collector

INTENSIFIER PUMP

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 2.1 gpm (7.9 lpm)
  • Max rated orifice size 0.021 in (0.53 mm)
  • Two single piston, dual plunger intensifiers with tie rod design
  • Single, 2 quart (1.9 liters) attenuator
  • Incoming water control
  • Optional boost pump

ELECTRIC MOTOR

  • Motor output: 100 hp (75 kw)
  • TEFC NEMA premium efficiency motor
  • Full load amps @ 460vac: (60Hz) 121

WATER/ENVIRONMENT

  • Low-pressure process water supply requirement: 2.1 gpm (7.9 lpm) @ 30 psi (2 bar) min.
  • Max water temp: 70ºF (21ºC)
  • Ambient air temperature: 50–100ºF (10–37ºC)

HYDRAULICS

  • Axial piston, variable displacement, pressure-compensated hydraulic pump
  • Thermostatically-controlled cooling loop (requires additional water supply)
  • Hydraulic accumulator prolongs component life and improves output quality
  • Reservoir capacity: 55 gallons (208 liters)

WARRANTY

  • 1-year or 2,000-hour pump warranty
  • 2-year or 4,000-hour hydraulic circuit warranty
  • Extended Warranty Available
  • Lifetime factory product training