Hero 150+

HERO 150+

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The HERO 150+ Waterjet Intensifier Pump, with Jet Smart+ Controls is the pinnacle of UHP Intensifier Pump technology, featuring the power of a 150hp motor and the finesse of advanced controls.  Its two intensifiers deliver an industry leading 3 gallons per minute of high pressure water. Whether its driving one or even two Jet Edge motion systems, incorporated into cleaning cells, or used for powering multiple abrasive cutting heads on the same system it won’t let you down.

Jet Edge allows you to Custom Configure your Intensifier Pump to match your unique application with the best value. If you require an engineering analysis to proof your processing goals, request a Free Application Analysis.

Jet Smart Controls make the user interface simple. Quickly set pump pressures, visualize intensifier cycles, receive performance feedback in real time and receive prompts for scheduled maintenance.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 3.2 gpm (12.1 lpm)
  • Max rated orifice size 0.025 in (.64 mm)
  • Motor output 150 hp (112 kw)
  • Two single piston, dual plunger intensifiers
    with tie rod design
  • Motor output 150 hp (112 kw)

Category:

Description

CONSTRUCTION

  • Heavy-gauge sheet metal covers
  • Rugged all-steel welded framework
  • Hinged cover & quick-remove access covers
  • Sound Insulating Kit

JET SMART+ CONTROLS

  • Advanced Controls Touch Screen
  • Maintenance schedules with prompts
  • Soft Start motor starter
  • Remote pump start
  • Dual pressure set points
  • Check tube temp sensor
  • Bleed Down temp sensor
  • Auto leakage sensor
  • Electronic hydraulic pressure control
  • Optional remote analog pressure control
  • Light stack beacon with audible warning

INTENSIFIER PUMP

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 3.2 gpm (12.1 lpm)
  • Max rated orifice size 0.025 in (.64 mm)
  • Two single piston, dual plunger intensifiers with tie rod design
  • Single, 2 quart (1.9 liters) attenuator
  • Incoming water control
  • Boost pump

ELECTRIC MOTOR

  • Motor output: 150 hp (112 kw)
  • TEFC NEMA premium efficiency motor
  • Full load amps @ 460vac: (60Hz) 121

WATER/ENVIRONMENT

  • Low-pressure process water supply requirement: 3.2 gpm (12.1 lpm) @ 30 psi (2 bar) min.
  • Max water temp: 70ºF (21ºC)
  • Ambient air temperature: 50–100ºF (10–37ºC)

HYDRAULICS

  • Axial piston, variable displacement, pressure-compensated hydraulic pump
  • Thermostatically-controlled cooling loop (requires additional water supply)
  • Hydraulic accumulator prolongs component life and improves output quality
  • Reservoir capacity: 55 gallons (208 liters)

WARRANTY

  • 1-year or 2,000-hour pump warranty
  • 2-year or 4,000-hour hydraulic circuit warranty
  • Extended Warranty Available
  • Technical service and free lifetime factory training