Hero 150

HERO 150

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The HERO 150 Waterjet Intensifier Pump, with Jet Smart Controls is the brute that the name suggests. With two intensifiers delivering an industry leading 3 gallons per minute of high pressure water, nothing stands in its way. Whether its driving one or even two Jet Edge motion systems, incorporated into cleaning cells, or used for powering multiple abrasive cutting heads on the same system it won’t let you down.

Jet Edge allows you to Custom Configure your Intensifier Pump to match your unique application with the best value. If you require an engineering analysis to proof your processing goals, request a Free Application Analysis.

Jet Smart Controls make the user interface simple. Quickly set pump pressures, visualize intensifier cycles, receive performance feedback in real time and receive prompts for scheduled maintenance.

Rated pressure: 60,000 psi (4,100 bar)
UHP flow rate: 3.2 gpm (12.1 lpm)
Max rated orifice size 0.025 in (.64 mm)
Motor output 150 hp (112 kw)
Two single piston, dual plunger intensifiers
with tie rod design
Motor output 150 hp (112 kw)

Description

CONSTRUCTION

Heavy-gauge sheet metal covers
Rugged all-steel welded framework
Hinged cover & quick-remove access covers
Sound Insulating Kit

JET SMART CONTROLS

Interactive Controls Touch Screen
Maintenance schedules with prompts
Remote pump start
Wye-Delta Motor Starter with optional Soft Start motor starter
Dual pressure set points
Manual pressure control with Soft Start accumulator
Leakage water collector

INTENSIFIER PUMP

Rated pressure: 60,000 psi (4,100 bar)
UHP flow rate: 3.2 gpm (12.1 lpm)
Max rated orifice size 0.025 in (.64 mm)
Two single piston, dual plunger intensifiers with tie rod design
Single, 2 quart (1.9 liters) attenuator
Incoming water control
Boost pump

ELECTRIC MOTOR

Motor output: 150 hp (112 kw)
TEFC NEMA premium efficiency motor
Full load amps @ 460vac: (60Hz) 121

WATER/ENVIRONMENT

Low-pressure process water supply requirement: 3.2 gpm (12.1 lpm) @ 30 psi (2 bar) min.
Max water temp: 70ºF (21ºC)
Ambient air temperature: 50–100ºF (10–37ºC)

HYDRAULICS

Axial piston, variable displacement, pressure-compensated hydraulic pump
Thermostatically-controlled cooling loop (requires additional water supply)
Hydraulic accumulator prolongs component life and improves output quality
Reservoir capacity: 55 gallons (208 liters)

WARRANTY

1-year or 2,000-hour pump warranty
2-year or 4,000-hour hydraulic circuit warranty
Extended Warranty Available
Lifetime factory product training