OMNIJET III CUTTING HEAD REBUILD
Watch this video to learn how to safely maintain your OmniJet III.
ROTARY SWIVEL SEAL REPLACEMENT
Watch this video to learn when and how to replace worn Rotary Swivel Seals.
APPLICATION ANALYSIS
Is waterjet cutting right for my application? Critical dimensions, desired finish quality and current cycle times form the base line in which the Waterjet Application Analysis will initially be evaluated against.
CRITICAL TECHNICAL BULLETIN: INTENSIFIER HOLLOW SCREW UPDATE
Jet Edge is releasing an updated low pressure poppet screw to use on HERO Series, IP Series, and previous 55/60k series intensifier pumps.
CRITICAL TECHNICAL BULLETIN: INTENSIFIER UPGRADES TO GEN 3
The intensifiers detailed below will no longer have certain service parts available and will require a GEN 3 Intensifier Upgrade Kit. Plan now for your upgrade.
CRITICAL TECHNICAL BULLETIN: IGEMS ANNUAL SUBSCRIPTION LICENSE
If you are operating IGEMS USB Licenses, activated prior to 01/01/19, you will be required to renew your license to a Subscription License in 2023.
CRITICAL TECHNICAL BULLETIN: HOW TO CHARGE AN ACCUMULATOR
The Accumulator’s bladder is pressurized with nitrogen to about 30 – 40% of the pressure of the hydraulic circuit in which it is installed (its “precharge pressure”) and requires periodic charging to maintain its pressure.
CRITICAL TECHNICAL BULLETIN: WINDOWS 10 UPGRADE
Microsoft officially ended support for Windows 7 on January 14, 2020, and Windows XP April 8, 2014. Your computer will still work, but your OS will no longer receive software and critical security updates from Microsoft which makes your cutting system more vulnerable to security threats with no technical support to fix them. Microsoft is strongly recommending users upgrade their cutting system OS to Windows 10.
RECOMMENDED TECHNICAL BULLETIN: PERMALIGN ARROW SL
The new Permalign Arrow SL eliminates the right angle inlet block currently used on the Permalign Edge AbrasiveJet.
RECOMMENDED TECHNICAL BULLETIN: HP END CAP ALIGNMENT TOOL
THIS IS A RECOMMENDED ALERT: When High Pressure End Caps are installed on your Jet Edge Intensifier Pump at the factory, great care is taken to align the High Pressure End Cap to the Hydraulic End Block. Failure to align the plunger and evenly torque the High Pressure End Cap causes the end cap to become misaligned. This misalignment leads to reduced High Pressure Seal life and much higher maintenance costs.