jetstart-series-full-reverse (1)
510A 510A5 Waterjet System - Jet Edge (2)

JET START 3-AXIS & 5-AXIS MID RAIL ABRASIVE WATERJET SYSTEM

Jet Start Your Abrasive Waterjet Cutting

The Jet Start Series takes the no-nonsense workhorse 3-axis or 5-axis motion system and pairs it with Jet Edge’s HERO 50 intensifier pump that is loaded with features including Jet Smart controls.

The Jet Start 510A, 3-axis 5′ x 10″ motion system is capable of cutting complex parts from virtually any material with ultra-high precision.

The Jet Start 510A5, 5-axis 5′ x 10″ motion system launches you into complex, contoured cutting right from the start. Cut complex, precision shapes in tough materials like stainless steel, Inconel and titanium with no heat affected zone like you see in laser or plasma cutting.

Jet Start your waterjet cutting operation with a Jet Start 510A or Jet Start 510A5 Mid Rail Abrasive Waterjet system.

Hero50 Image - Jet Edge (black) 500x500

HERO 50 

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The HERO 50 Waterjet Intensifier Pump, with Jet Smart Controls sets a new performance standard for UHP Intensifier pumps. Dependable and easy to maintain, the HERO 50 can cut and trim a large array of materials including heat sensitive metals, delicate foams, and tough substances like granite and glass.

Jet Edge allows you to Custom Configure your Intensifier Pump to match your unique application with the best value. If you require an engineering analysis to proof your processing goals, visit our website and schedule a Free Application Analysis.

Jet Smart Controls provide real time feedback on pump performance with advanced maintenance scheduling. Set and monitor pump pressures from the interactive control pad. Receive service reminders or system issue warnings as they arise. Visualize intensifier cycles and easily access operational performance

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 1.1 gpm (4.1 lpm)
  • Max rated orifice size 0.015 in (0.38 mm)
  • Single piston, dual plunger intensifier with
    tie rod design
  • Motor output: 50 hp (37 kw)

THE JET START SERIES MID RAIL ABRASIVE WATERJET SYSTEM

Jet Edge allows you to Custom Configure your Waterjet System to match your unique application with the best value. If you require an engineering analysis to proof your processing goals, visit our website and schedule a Free Application Analysis.

The Jet Start 510A takes the no-nonsense workhorse 3-axis,5′ x 10′ motion system and pairs it with Jet Edge’s HERO 50 intensifier pump that is loaded with features including Jet Smart controls. The result is an Abrasive Waterjet system capable of cutting complex parts from virtually any material with ultra-high precision. Jet Start your waterjet cutting operation with a Jet Start 510A Mid Rail Abrasive Waterjet system.

Jet Start Series 510A5 (reverse) #2 - Jet Edge Waterjet Systems

The Jet Start 510A5, 5-axis motion system launches you into complex, contoured cutting right from the start. Combining Jet Edge’s premium 5′ x 10′ mid rail motion system with Jet Edge’s HERO 50 intensifier pump featuring Jet Smart controls, dramatically expands your production capabilities. Cut complex, precision shapes in tough materials like stainless steel, Inconel and titanium with no Heat Affected Zone like you see in laser or plasma cutting. Jet Start the value add of 5-axis abrasivejet cutting with a Jet Start 510A5 Mid Rail Abrasive Waterjet system.

THE JET START SERIES AT A GLANCE

ISOLATED MOTION SYSTEM

Our Jet Start Series has an isolated motion system for pinpoint accuracy.

WATERJET AND ABRASIVEJET CUTTING HEADS

High flow rates can drive multiple Waterjet and AbrasiveJet cutting heads for maximum productivity.

MAX RATED ORIFICE SIZE UP TO 0.025 IN (0.64 MM)

Customize your cutting system around the materials you cut the most often including heat sensitive metals, delicate foams, and tough materials like granite and glass.

3-AXIS AND 5-AXIS CUTTING HEAD OPTIONS

Our Jet Start Series offers turn key 3-axis and 5-axis options with additional customization available.

JET EDGE IS A CUT ABOVE

UNMATCHED PRECISION & ACCURACY

Turn to Jet Edge when accuracy and speed really matter. Jet Edge Motion Systems isolate the cutting head from the catcher tank so noise and vibration do not transfer. This isolation of the tank ensures Jet Edge’s industry-leading accuracy and precision over the full life of the equipment. Applications requiring high tolerance, speed and operator efficiency will benefit greatly from the capabilities offered by the Jet Edge range of Motion Systems.

FULL LINE PROVIDER

Jet Edge is one of the few waterjet equipment companies that manufactures both its motion systems and pumps. This ensures seamless operation in the system between the pump and the motion controls and means you never get caught on service between manufacturers. Visit our accessories page to learn about the rest of the environmental systems Jet Edge makes available for your system including Abrasive Hoppers, Chillers, Abrasive Removal, Closed Loop Systems and more.

RANGE OF APPLICATIONS

Whether you are water jet cutting or abrasive cutting in 2 dimensions or 3 dimensions with a 5-axis cutting head we have the solution. Our Mid Rail and High Rail Motion systems when paired with our full range of Jet Edge Intensifier Pumps, excel across industries including steel distribution, custom manufacturing, food processing, robotic trimming, glass cutting, stone detailing, surface preparation and more. Cutting, slitting, cleaning, trimming along with other specialty applications are regularly performed with our pumps and motion systems.

Lights Out Cutting Icon (modified 2) - Jet Edge

PRODUCTIVITY OPTIONS

Jet Edge offers a menu of options for enhanced productivity. Lights out cutting enables machine operation without the direct supervision of a machinist. Multiple cutting heads increase productivity. Remote pump start allows pump control from the main system controls. Redundant intensifiers allow you to service your pump without bringing your system down. Load/unload systems, multiple cutting heads, heigh sensing, laser mapping, 5-axis cutting, robotic swivels, robotic integration and more allow you to design your system for the optimum productivity for your manufacturing system.

Control Systems Icon - Jet Edge

INDUSTRY LEADING CONTROL SYSTEMS

Utilizing IGEMS CAD/CAM software and an Aquavision DI fully networkable industrial PC controller, Jet Edge Motion Systems offer an enjoyable user experience. The system’s interface and commands make it easy to import or crate CAD files and programs. The optional Nesting Module provides Multi-sheet Nesting, common cutline nesting and unlike parts cutting from a single sheet to maximize material use. During operations, users are offered visibility and access to machine code via a full-featured handheld pendant.

CUSTOMIZED TECHNOLOGY & PERFORMANCE

Have a unique product or application? Jet Edge engineers and application specialists will work with you to confirm your requirements can be met with test cuts. After understanding your production goals, they will also assist in developing a custom configuration that meets your quality and productivity goals. And they will stay with you if you need additional help in implementation and system programming. Contact us to discuss your unique application!

READY TO JET START YOUR ABRASIVE WATERJETTING?

 

Contact a Jet Edge Sales Partner to learn more about our waterjet cutting applications.

Linkedin