Mobile Waterjet Pipe Cutter

WATERJET PIPE CUTTER

ABRASIVEJET CUTTING SYSTEM

For Cutting Pipelines, Reinforced Concrete, and Metal

Jet Edge’s Waterjet Pipe Cutter System is a hydraulically controlled portable abrasivejet cutting system designed especially for cutting pipelines, reinforced concrete and metal structures. A specially designed track allows the Pipe Cutter to clamp to standard sized pipe (6”-60” diameter) for pipe cutting operations, cutting both horizontally or vertically.

The system includes a Pipe Cutter carriage, hydraulic drive assembly, abrasivejet, abrasive hopper, abrasivejet mounting hardware, control panel, remote UHP control assembly and hoses.

Specially designed track allows the Pipe Cutter to clamp to standard sized pipe (6”-60” diameter) for pipe cutting operations
Can operate horizontally or vertically
Can be attached to a variety of tracks for cutting flat or curved surfaces for linear cutting applications
Operating Pressure 55,000 psi (3,900 bar) max

Description

TRACK OPTIONS

3, 5 and 10 linear-foot tracks
Low profile, rigid and vacuum tracks available
Pipe track: 6–60 inches, 2” increment (152–1524 mm)

HEAD MANIPULATOR

Drive unit adapts for use with straight-line track or pipe cutting bands
Reversible drive motor with interchangeable gear drive
Precise speed control for accurate cutting feed rates
Center line mounting of abrasive cutting head
Adjustable angle for beveling cuts

HIGH FLOW ABRASIVE HEAD

For cutting thicker material or multiple layers
Length 7.55 in (19.1 cm)
Weight 4.00 lbs ( 1.8 kg)
Operating air pressure (min) 60 psi (4 bar)
Water pressure (max) 55,000 psi (3800 bar)
Orifice range 0.023-0.042 in
Nozzle range 0.095-0.125 in ID
Max flow rate 5.1 gpm (19.04 lpm)

MOVEMENT SPEED

Varies due to several ranges of gear reducers

PERMALIGN II ABRASIVE HEAD

Length 10.94 in (27.8 cm)
Weight 4.00 lbs ( 1.8 kg)
Operating air pressure (min) 60 psi (4 bar)
Water pressure (max) 60,000 psi (4100 bar)
Orifice range .003 – .023 in
Nozzle range .020 – .065 in ID
Max flow rate 2.1 gpm (7.95 lpm)

ABRASIVE DELIVERY SYSTEM

Durable steel design
Two-wheel pneumatic tires with rigged frame
Air-regulated metering valve
Delivery rate: up to 3 lb (1.36 kg)/minute

REQUIRED EQUIPMENT

A mobile intensifier pump to supply UHP water
Air compressor to supply abrasive hopper
Hydraulic power to operate support equipment
Track (see above for track options)
Orifices and nozzles to shape UHP water stream
Abrasive