HERO 50+

HERO 50+ 


High Velocity Stream of Ultra High Pressure Water

The HERO 50+ Waterjet Intensifier Pump, with Jet Smart Controls takes the best of the HERO 50 and doubles down on UHP Intensifier pumps. With even more intuitive controls, the HERO 50+ can cut and trim a large array of materials including heat sensitive metals, delicate foams, and tough substances like granite and glass.

Jet Edge allows you to Custom Configure your Intensifier Pump to match your unique application with the best value. If you require an engineering analysis to proof your processing goals, visit our website and schedule a Free Application Analysis.

Jet Smart+ Controls real time feedback on pump performance with advanced maintenance scheduling. Set and monitor pump pressures from the interactive control pad. Receive service reminders or system issue warnings as they arise. Visualize intensifier cycles and easily access operational performance.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 1.1 gpm (4.1 lpm)
  • Max rated orifice size 0.015 in (0.38 mm)
  • Single piston, dual plunger intensifier with
    tie rod design
  • Motor output: 50 hp (37 kw)




  • Heavy-gauge sheet metal covers
  • Rugged all-steel welded framework
  • Hinged cover & quick-remove access covers
  • Sound Insulating Kit


  • Advanced Controls Touch Screen
  • Maintenance schedules with prompts
  • Remote monitoring
  • Light stack beacon with audible warning
  • Remote pump start
  • Soft Start motor starter
  • Dual pressure set points
  • Electronic hydraulic pressure control
  • Optional remote analog pressure control
  • Check tube temp sensor
  • Bleed Down temp sensor
  • Auto leakage sensor


  • Rated pressure: 60,000 psi (4,100 bar)
  • Single piston, dual plunger intensifier with tie rod design
  • Single, 1 quart (0.9 liters) attenuator
  • Incoming water control
  • UHP flow rate: 1.1 gpm (4.1 lpm)
  • Optional redundant intensifier
  • Optional boost pump


  • Motor output: 50 hp (37 kw)
  • TEFC NEMA premium efficiency motor
  • Full load amps @ 460vac: (60Hz) 62
  • Full load amps @ 230vac: (60Hz) 122


  • Low-pressure process water supply requirement: 1.1 gpm (4.1 lpm) @ 30 psi (2 bar) min.
  • Max water temp: 70ºF (21ºC)
  • Ambient air temperature: 50–100ºF (10–37ºC)


  • Axial piston, variable displacement, pressure-compensated hydraulic pump
  • Thermostatically-controlled cooling loop (requires additional water supply)
  • Hydraulic accumulator prolongs component life and improves output quality
  • Reservoir capacity: 35 gallons (135 liters)


  • 1-year or 2,000-hour pump warranty
  • 2-year or 4,000-hour hydraulic circuit warranty
  • Extended Warranty Available
  • Lifetime factory product training