Ultra High Pressure Water Jet Pumps

Widest Range of Ultra High Pressure Waterjet Pumps in the Industry

The ultra-high-pressure waterjet pump is the heart of your waterjet cutting. At Jet Edge, we have a pump for every application allowing you to match the exact pump to your exact needs. Whether you’re cutting with water only or running a 24/7 operation with multiple abrasive jets, Jet Edge has a pump that will bring your application the tough love it needs.

Hero 50 - Jet Edge Waterjet Intensifier Pumps
Hero 50 – WATERJET INTENSIFIER PUMP

with Jet Smart Controls

The HERO 50 Waterjet Intensifier Pump, with Jet Smart Controls sets a new performance standard for UHP Intensifier pumps. Dependable and easy to maintain, the versatile HERO 50 can cut and trim a large array of materials including heat sensitive metals, delicate foams, and tough substances like granite, glass and composites.

  • null

    Jet Smart Interactive Controls

  • null

    Rated pressure: 60,000 psi (4,100 bar)

  • null

    One single piston, dual plunger intensifier

  • null

    TEFC NEMA 50hp premium efficiency motor

  • null

    UHP flow rate: 1.1 gpm (4.1 lpm)

  • null

    Max rated orifice size 0.015 in (0.38mm)

Hero 50+ - Jet Edge Waterjet Intensifier Pump
HERO 50+ – WATERJET INTENSIFIER PUMP

with Jet Smart+ Controls

The HERO 50+ Waterjet Intensifier Pump, with Jet Smart+ Controls takes the best of the HERO 50 and doubles down with a host of additional premium features including a Soft Start Motor Starter, Light Stack with audible warning, electronic hydraulic pressure control, check tube sensors, bleed down sensor and auto leakage sensor.

  • null

    Jet Smart+ Interactive Controls with Remote Access

  • null

    Rated pressure: 60,000 psi (4,100 bar)

  • null

    One single piston, dual plunger intensifier

  • null

    TEFC NEMA 50hp premium efficiency motor

  • null

    UHP flow rate: 1.1 gpm (4.1 lpm)

  • null

    Max rated orifice size 0.015 in (0.38mm)

Hero 100 - Jet Edge Waterjet Intensifier Pump
HERO 100 – WATERJET INTENSIFIER PUMP

with Jet Smart Controls

The HERO 100 Waterjet Intensifier Pump, with Jet Smart Controls provides the power to drive greater water volumes at Ultra High Pressure by adding a second intensifier to the mix. The HERO Series Pumps are dependable, easy to maintain, and prompt you for scheduled service. Teamed with a Jet Edge motion system, multiple cutting heads can be configured for both waterjet cutting and abrasive waterjet cutting.

  • null

    Jet Smart Interactive Controls

  • null

    Rated pressure: 60,000 psi (4,100 bar)

  • null

    Two single piston, dual plunger intensifiers

  • null

    TEFC NEMA 100hp premium efficiency motor

  • null

    UHP flow rate: 2.1 gpm (7.9 lpm)

  • null

    Max rated orifice size 0.021 in (0.53 mm)

Hero 100+ - Jet Edge Waterjet Intensifier Pump
HERO 100+ – WATERJET INTENSIFIER PUMP

with Jet Smart+ Controls

The HERO 100+ Waterjet Intensifier Pump leverages the second intensifier with its interactive Jet Smart+ Controls. The plus adds a host of additional premium features including a Soft Start Motor Starter, Light Stack with audible warning, electronic hydraulic pressure control, check tube sensors, bleed down sensor and auto leakage sensor. Doubling the Flow Rate allows multiple cutting heads to be configured on the same motions system.

  • null

    Jet Smart+ Interactive Controls with Remote Access

  • null

    Rated pressure: 60,000 psi (4,100 bar)

  • null

    Two single piston, dual plunger intensifiers

  • null

    TEFC NEMA 100hp premium efficiency motor

  • null

    UHP flow rate: 2.1 gpm (7.9 lpm)

  • null

    Max rated orifice size 0.021 in (0.53 mm)

Hero 150 - Jet Edge Waterjet Intensifier Pump
HERO 150 – WATERJET INTENSIFIER PUMP

with Jet Smart Controls

The HERO 150 Waterjet Intensifier Pump, with Jet Smart Controls is the brute that the name suggests. With two intensifiers delivering an industry leading 3 gallons per minute of high pressure water, nothing stands in its way. Whether its driving one or even two Jet Edge motion systems, incorporated into cleaning cells, or used for powering multiple abrasive cutting heads on the same system it won’t let you down.

  • null

    Jet Smart Interactive Controls

  • null

    Rated pressure: 60,000 psi (4,100 bar)

  • null

    Two single piston, dual plunger intensifiers

  • null

    TEFC NEMA 150hp premium efficiency motor

  • null

    UHP flow rate: 3.2 gpm (12.1 lpm)

  • null

    Max rated orifice size 0.025 in (0.64mm)

Hero 150+ - Jet Edge Waterjet Intensifier Pump
HERO 150+ – WATERJET INTENSIFIER PUMP

with Jet Smart Controls

The HERO 150+ Waterjet Intensifier Pump, with Jet Smart+ Controls is the pinnacle of UHP Intensifier Pump technology, featuring the power of a 150hp motor and the finesse of advanced controls. Two intensifiers deliver an industry leading 3 gallons per minute of high pressure water, while providing real time feedback on performance and prompting when scheduled service is due.

  • null

    Jet Smart+ Interactive Controls with Remote Access

  • null

    Rated pressure: 60,000 psi (4,100 bar)

  • null

    Two single piston, dual plunger intensifiers

  • null

    TEFC NEMA 150hp premium efficiency motor

  • null

    UHP flow rate: 3.2 gpm (12.1 lpm)

  • null

    Max rated orifice size 0.025 in (0.64mm)

IP 60 - 200 - Jet Edge Waterjet Intensifier Pump
IP60 – 200 – WATERJET INTENSIFIER PUMP

High Velocity of Ultra High Pressure Water
The IP60-200 is a waterjet pump beast. With a 4.0 gpm flow rate at 55,000 psi dynamic, you can run up to four 0.015″/0.045″ orifice/nozzle combinations to cut through thick material and generate four parts at a time. You’ll be able to cut your application’s material and time spent on the job with this versatile pump.

  • null

    Customizable PLC controls

  • null

    Rate pressure: 60,000 psi (4,100 bar)

  • null

    Two single piston, dual plunger intensifiers

  • null

    TEFC NEMA 200hp premium efficiency motor

JET EDGE HERO PUMPS UTILIZE PREDICTIVE MAINTENANCE

See how Jet Smart Controls improve ease of operations and reduce downtime.

JET EDGE ULTRA HIGH PRESSURE WATERJET INTENSIFIER PUMPS

WATERJET PUMPS THAT WILL BRING YOUR APPLICATION THE TOUGH LOVE IT NEEDS

Jet Edge is a leading manufacturer of ultra high pressure waterjet intensifier pumps and accessories for precision waterjet cutting, surface preparation and coatings removal. Jet Edge Ultra High Pressure Waterjet Intensifier pumps are used around the world in the most demanding applications. Your high pressure intensifier pumps is the heart of your waterjet application, so give it the tough love it deserves with a Jet Edge Ultra High Pressure Waterjet Intensifier Pump.

24 Hours/day Icon - Jet Edge Waterjets

Operate 24 Hours A Day

Jet Edge Waterjet Cutter Motion Systems are suited for heavy duty, high volume applications, and are built to run 24 hours day, 7 days a week, 365 days a year.

PSI Gauge Icon - Jet Edge Waterjet Systems

Up to 90,000 PSI

We offer hydraulic intensifier pumps rated 60K PSI and 90K PSI with multiple electric and diesel motor options.

Built to last icon - Jet Edge Waterjet Systems

Provide Years of Service

Endurance is everything! Jet Edge Waterjet Cutter Motion Systems and Pumps are ultra-reliable and designed to provide more years of service than the competitors.

Made in the USA - Jet Edge Waterjets

Made in the USA

All Jet Edge Waterjet Systems and pumps are proudly made in the United States of America.

READY TO DESIGN YOUR HIGH PRESSURE WATER SOLUTION?

Jet Edge is a leading manufacturer of waterjet cutting machines, intensifier pumps, and accessories. We work with our client partners to design solutions that are unique to your application. Whether is requires cutting, cleaning, stripping, testing or other processing, out engineering team is standing by to engage.

Linkedin