Ultra High Pressure Water Jet Pumps
Widest Range of Ultra High Pressure Waterjet Pumps in the Industry
The ultra-high-pressure waterjet pump is the heart of your waterjet cutting. At Jet Edge, we have a pump for every application allowing you to match the exact pump to your exact needs. Whether you’re cutting with water only or running a 24/7 operation with multiple abrasive jets, Jet Edge has a pump that will bring your application the tough love it needs.
Hero 50 – WATERJET INTENSIFIER PUMP
with Jet Smart Controls
The HERO 50 Waterjet Intensifier Pump, with Jet Smart Controls sets a new performance standard for UHP Intensifier pumps. Dependable and easy to maintain, the versatile HERO 50 can cut and trim a large array of materials including heat sensitive metals, delicate foams, and tough substances like granite, glass and composites.
Jet Smart Interactive Controls
Rated pressure: 60,000 psi (4,100 bar)
One single piston, dual plunger intensifier
TEFC NEMA 50hp premium efficiency motor
UHP flow rate: 1.1 gpm (4.1 lpm)
Max rated orifice size 0.015 in (0.38mm)
HERO 50+ – WATERJET INTENSIFIER PUMP
with Jet Smart+ Controls
The HERO 50+ Waterjet Intensifier Pump, with Jet Smart+ Controls takes the best of the HERO 50 and doubles down with a host of additional premium features including a Soft Start Motor Starter, Light Stack with audible warning, electronic hydraulic pressure control, check tube sensors, bleed down sensor and auto leakage sensor.
Jet Smart+ Interactive Controls with Remote Access
Rated pressure: 60,000 psi (4,100 bar)
One single piston, dual plunger intensifier
TEFC NEMA 50hp premium efficiency motor
UHP flow rate: 1.1 gpm (4.1 lpm)
Max rated orifice size 0.015 in (0.38mm)
HERO 100 – WATERJET INTENSIFIER PUMP
with Jet Smart Controls
The HERO 100 Waterjet Intensifier Pump, with Jet Smart Controls provides the power to drive greater water volumes at Ultra High Pressure by adding a second intensifier to the mix. The HERO Series Pumps are dependable, easy to maintain, and prompt you for scheduled service. Teamed with a Jet Edge motion system, multiple cutting heads can be configured for both waterjet cutting and abrasive waterjet cutting.
Jet Smart Interactive Controls
Rated pressure: 60,000 psi (4,100 bar)
Two single piston, dual plunger intensifiers
TEFC NEMA 100hp premium efficiency motor
UHP flow rate: 2.1 gpm (7.9 lpm)
Max rated orifice size 0.020 in (0.51 mm) on both units
HERO 100+ – WATERJET INTENSIFIER PUMP
with Jet Smart+ Controls
The HERO 100+ Waterjet Intensifier Pump leverages the second intensifier with its interactive Jet Smart+ Controls. The plus adds a host of additional premium features including a Soft Start Motor Starter, Light Stack with audible warning, electronic hydraulic pressure control, check tube sensors, bleed down sensor and auto leakage sensor. Doubling the Flow Rate allows multiple cutting heads to be configured on the same motions system.
Jet Smart+ Interactive Controls with Remote Access
Rated pressure: 60,000 psi (4,100 bar)
Two single piston, dual plunger intensifiers
TEFC NEMA 100hp premium efficiency motor
UHP flow rate: 2.1 gpm (7.9 lpm)
Max rated orifice size 0.020 in (0.51 mm) on both units
HERO 150+ – WATERJET INTENSIFIER PUMP
with Jet Smart Controls
The HERO 150+ Waterjet Intensifier Pump, with Jet Smart+ Controls is the pinnacle of UHP Intensifier Pump technology, featuring the power of a 150hp motor and the finesse of advanced controls. Two intensifiers deliver an industry leading 3 gallons per minute of high pressure water, while providing real time feedback on performance and prompting when scheduled service is due.
Jet Smart+ Interactive Controls with Remote Access
Rated pressure: 60,000 psi (4,100 bar)
Two single piston, dual plunger intensifiers
TEFC NEMA 150hp premium efficiency motor
UHP flow rate: 3.2 gpm (12.1 lpm)
Max rated orifice size 0.025 in (0.64mm)
IP60 – 200 – WATERJET INTENSIFIER PUMP
High Velocity of Ultra High Pressure Water
The IP60-200 is a waterjet pump beast. With a 4.0 gpm flow rate at 55,000 psi dynamic, you can run up to four 0.015″/0.045″ orifice/nozzle combinations to cut through thick material and generate four parts at a time. The IP60-200 versatility provides a platform for custom applications, custom features and custom controls.
Customizable PLC controls
Rate pressure: 60,000 psi (4,100 bar)
TEFC NEMA 200hp premium efficiency motor
Broad array of High Pressure Application Options
JET EDGE ULTRA-HIGH PRESSURE
WATERJET INTENSIFIER PUMPS
WATERJET PUMPS THAT WILL BRING YOUR APPLICATION THE TOUGH LOVE IT NEEDS
Jet Edge is a leading manufacturer of ultra high pressure waterjet intensifier pumps and accessories for precision waterjet cutting, surface preparation and coatings removal. Jet Edge Ultra High Pressure Waterjet Intensifier pumps are used around the world in the most demanding applications. Your high pressure intensifier pumps is the heart of your waterjet application, so give it the tough love it deserves with a Jet Edge Ultra High Pressure Waterjet Intensifier Pump.
Operate 24 Hours A Day
Jet Edge Waterjet Cutter Motion Systems are suited for heavy duty, high volume applications, and are built to run 24 hours day, 7 days a week, 365 days a year.
Up to 60,000 PSI
We offer hydraulic intensifier pumps rated 60K PSI with multiple electric motor options.
Provide Years of Service
Endurance is everything! Jet Edge Waterjet Cutter Motion Systems and Pumps are ultra-reliable and designed to provide more years of service than the competitors.
Made in the USA
All Jet Edge Waterjet Systems and pumps are proudly made in the United States of America.
READY TO DESIGN YOUR HIGH PRESSURE WATER SOLUTION?
Jet Edge is a leading manufacturer of waterjet cutting machines, intensifier pumps, and accessories. We work with our client partners to design solutions that are unique to your application. Whether it requires cutting, cleaning, stripping, testing or other processing, our engineering team is standing by to engage.