Mobile Waterjet Pipe Cutter

WATERJET PIPE CUTTER

ABRASIVEJET CUTTING SYSTEM

For Cutting Pipelines, Reinforced Concrete, and Metal

Jet Edge’s Waterjet Pipe Cutter System is a hydraulically controlled portable abrasivejet cutting system designed especially for cutting pipelines, reinforced concrete and metal structures. A specially designed track allows the Pipe Cutter to clamp to standard sized pipe (6”-60” diameter) for pipe cutting operations, cutting both horizontally or vertically.

The system includes a Pipe Cutter carriage, hydraulic drive assembly, abrasivejet, abrasive hopper, abrasivejet mounting hardware, control panel, remote UHP control assembly and hoses.

  • Specially designed track allows the Pipe Cutter to clamp to standard sized pipe (6”-60” diameter) for pipe cutting operations
  • Can operate horizontally or vertically
  • Can be attached to a variety of tracks for cutting flat or curved surfaces for linear cutting applications
  • Operating Pressure 55,000 psi (3,900 bar) max

Description

TRACK OPTIONS

  • 3, 5 and 10 linear-foot tracks
  • Low profile, rigid and vacuum tracks available
  • Pipe track: 6–60 inches, 2” increment (152–1524 mm)

HEAD MANIPULATOR

  • Drive unit adapts for use with straight-line track or pipe cutting bands
  • Reversible drive motor with interchangeable gear drive
  • Precise speed control for accurate cutting feed rates
  • Center line mounting of abrasive cutting head
  • Adjustable angle for beveling cuts

HIGH FLOW ABRASIVE HEAD

  • For cutting thicker material or multiple layers
  • Length 7.55 in (19.1 cm)
  • Weight 4.00 lbs ( 1.8 kg)
  • Operating air pressure (min) 60 psi (4 bar)
  • Water pressure (max) 55,000 psi (3800 bar)
  • Orifice range 0.023-0.042 in
  • Nozzle range 0.095-0.125 in ID
  • Max flow rate 5.1 gpm (19.04 lpm)

MOVEMENT SPEED

  • Varies due to several ranges of gear reducers

PERMALIGN II ABRASIVE HEAD

  • Length 10.94 in (27.8 cm)
  • Weight 4.00 lbs ( 1.8 kg)
  • Operating air pressure (min) 60 psi (4 bar)
  • Water pressure (max) 60,000 psi (4100 bar)
  • Orifice range .003 – .023 in
  • Nozzle range .020 – .065 in ID
  • Max flow rate 2.1 gpm (7.95 lpm)

ABRASIVE DELIVERY SYSTEM

  • Durable steel design
  • Two-wheel pneumatic tires with rigged frame
  • Air-regulated metering valve
  • Delivery rate: up to 3 lb (1.36 kg)/minute

REQUIRED EQUIPMENT

  • A mobile intensifier pump to supply UHP water
  • Air compressor to supply abrasive hopper
  • Hydraulic power to operate support equipment
  • Track (see above for track options)
  • Orifices and nozzles to shape UHP water stream
  • Abrasive