Showing 1–16 of 46 results

Digital Readout for Multi-Head Positioning

DIGITAL READOUT

MULTI-HEAD WATERJETS

Monitor Performance in Real Time

The Digital Readout for Multi Head Positioning digitally displays waterjet cutting head positions, eliminating manual measurement.

Edge Dual Carriage Mid Rail Waterjet

EDGE DUAL CARRIAGE

MID RAIL WATERJET

with Aquavision DI Controller

The Edge Dual Carriage waterjet cutting machine is for those who demand both accuracy and productivity from their investment. The dual Z carriages operate independently so they can be programmed to double team a single part or cut two like parts simultaneously. Boasting ±0.001″ linear positional accuracy over 12″ (304 mm) per axis, ±0.001″ repeatability (bidirectional) and ±0.003″ renishaw ballbar tests of squareness and straightness over 24″ (608 mm), means never giving up on precision again.

  • Specify 3-axis cutting heads, 5-axis cutting heads or one of each
  • Independently driven, dual Z carriages can cut a single part together or two like parts simultaneously
  • 5-axis cutting head can cut bevels to 60° and eliminate tapers
  • Programable Z carriage with servo motor driven 12″ (304 mm) vertical travel height
  • Multiple accessory options to further increase productivity
  • Isolated catch tank for the highest precision
  • Adjustable pre-loaded anti-backlash recirculating ball screws
  • Protected critical bearing components with labyrinth seals and positive air pressure
  • Technical service and free lifetime factory training

EDGE X3-HR

EDGE X3-HR

HIGH RAIL GANTRY 3-AXIS WATERJET

with with Aquavision DI Controller

The Edge X3-HR, 3-Axis High Rail Water Jet Cutter opens up the work envelope for easier access and the overhead design raises critical components out of the processing environment. The Edge X3-HR is designed for high speed processing.  By attaching a precision machined Spreader Bar to the Z Carriage, up to ten sub-Z cutting heads can be mounted allowing you to cut ten identical parts in one cycle. Each independently controlled Sub Z can utilize a water only cutting head or abrasive cutting head.  Heads can be positioned manually or positioned automatically via your program.  Incorporate load/unload systems for even higher efficiency levels as parts unloading is done while the water jet is cutting its next job. Click on the links to learn more about Custom Applications and Custom Configurations.

  • 3-axis waterjet or abrasivejet cutting
  • Independently programmable Sub Z’s
  • Isolated catch tank for accuracy
  • Adjustable pre-loaded anti-backlash recirculating ball screws
  • Linear bearings, hardened precision ground ways
  • Protected critical bearing components with labyrinth seals and positive air pressure
  • Direct-couple, AC brushless servo motors with absolute encoders
  • Technical service and free lifetime factory training

EDGE X5 HR

EDGE X5-HR

HIGH RAIL GANTRY 5 AXIS WATERJET

with with Aquavision DI Controller

There are many benefits to a High Rail Waterjet Machine. First of all, it opens the work envelope for easier access, and the overhead design raises critical components out of the processing environment. The isolated motion system and rigid steel beams make this the most accurate waterjet cutter on the market. Incorporating the 5-axis cutting head into your Edge X5-HR system allows you to bevel cut angles to 60° in the hardest materials with a taper-free finish.  Aerospace, contract manufacturing and highly specialized applications companies that require accuracy, repeatability and high machine uptime from their abrasive cutting have found their system.  Click on the links to learn more about Custom Applications and Custom Configurations.

  • Easy-access work envelope
  • Motion components protected from harsh process environment
  • 5-axis cutting head can cut bevels to 60° and eliminate tapers
  • Programable Z carriage with servo motor driven 12″ (304 mm) vertical travel height
  • Multiple Configuration Options including integrated fixtures and lights out cutting
  • Isolated catch tank for the highest precision
  • Adjustable pre-loaded anti-backlash recirculating ball screws
  • Linear bearings, hardened precision ground ways
  • Protected critical bearing components with labyrinth seals and positive air pressure
  • Direct-couple, AC brushless servo motors with absolute encoders
  • Technical service and free lifetime factory training

HERO 100

HERO 100 

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The HERO 100 Waterjet Intensifier Pump, with Jet Smart Controls provides the power to drive greater water volumes at Ultra High Pressure. Teamed with a Jet Edge motion system, multiple cutting heads can be configured for both waterjet cutting and abrasive waterjet cutting.

Jet Edge allows you to Custom Configure your Intensifier Pump to match your unique application with the best value. If you require an engineering analysis to proof your processing goals, request a  Free Application Analysis.

Jet Smart Controls make the user interface simple. Quickly set pump pressures, visualize intensifier cycles, receive performance feedback in real time and receive prompts for scheduled maintenance.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 2.1 gpm (7.9 lpm)
  • Max rated orifice size 0.021 in (0.53 mm)
  • Two single piston, dual plunger intensifiers
    with tie rod design
  • Motor output: 100 hp (75 kw)

HERO 100+

HERO 100+ 

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The HERO 100+ Waterjet Intensifier Pump, provides the power to drive greater water volumes at Ultra High Pressure utilizing Jet Smart+ Controls.  By adding the plus, a host of additional premium features including a Soft Start Motor Starter, Light Stack with audible warning, electronic hydraulic pressure control, check tube sensors, bleed down sensor and auto leakage sensor. Teamed with a Jet Edge motion system, multiple cutting heads can be configured for both waterjet cutting and abrasive waterjet cutting.

Jet Edge allows you to Custom Configure your Intensifier Pump to match your unique application with the best value. If you require an engineering analysis to proof your processing goals, request a Free Application Analysis.

Jet Smart+ Controls make the user interface simple.  Quickly set pump pressures, visualize intensifier cycles, receive performance feedback in real time and receive prompts for scheduled maintenance.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 2.1 gpm (7.9 lpm)
  • Max rated orifice size 0.021 in (0.53 mm)
  • Two single piston, dual plunger intensifier with
    tie rod design
  • Motor output: 100 hp (75 kw)

Hero 150

HERO 150 

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The HERO 150 Waterjet Intensifier Pump, with Jet Smart Controls is the brute that the name suggests.  With two intensifiers delivering an industry leading 3 gallons per minute of high pressure water, nothing stands in its way. Whether its driving one or even two Jet Edge motion systems, incorporated into cleaning cells, or used for powering multiple abrasive cutting heads on the same system it won’t let you down.

Jet Edge allows you to Custom Configure your Intensifier Pump to match your unique application with the best value. If you require an engineering analysis to proof your processing goals, request a Free Application Analysis.

Jet Smart Controls make the user interface simple. Quickly set pump pressures, visualize intensifier cycles, receive performance feedback in real time and receive prompts for scheduled maintenance.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 3.2 gpm (12.1 lpm)
  • Max rated orifice size 0.025 in (.64 mm)
  • Motor output 150 hp (112 kw)
  • Two single piston, dual plunger intensifiers
    with tie rod design
  • Motor output 150 hp (112 kw)

Hero 150+

HERO 150+

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The HERO 150+ Waterjet Intensifier Pump, with Jet Smart+ Controls is the pinnacle of UHP Intensifier Pump technology, featuring the power of a 150hp motor and the finesse of advanced controls.  Its two intensifiers deliver an industry leading 3 gallons per minute of high pressure water. Whether its driving one or even two Jet Edge motion systems, incorporated into cleaning cells, or used for powering multiple abrasive cutting heads on the same system it won’t let you down.

Jet Edge allows you to Custom Configure your Intensifier Pump to match your unique application with the best value. If you require an engineering analysis to proof your processing goals, request a Free Application Analysis.

Jet Smart Controls make the user interface simple. Quickly set pump pressures, visualize intensifier cycles, receive performance feedback in real time and receive prompts for scheduled maintenance.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 3.2 gpm (12.1 lpm)
  • Max rated orifice size 0.025 in (.64 mm)
  • Motor output 150 hp (112 kw)
  • Two single piston, dual plunger intensifiers
    with tie rod design
  • Motor output 150 hp (112 kw)

HERO 50

HERO 50 

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The HERO 50 Waterjet Intensifier Pump, with Jet Smart Controls sets a new performance standard for UHP Intensifier Pumps. Dependable and easy to maintain, the HERO 50 can cut and trim a large array of materials including heat sensitive metals, delicate foams, and tough substances like granite and glass.

Jet Edge allows you to Custom Configure your Intensifier Pump to match your unique application with the best value. If you require an engineering analysis to proof your processing goals, request a Free Application Analysis.

Jet Smart Controls make the user interface simple. Quickly set pump pressures, visualize intensifier cycles, receive performance feedback in real time and receive prompts for scheduled maintenance.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 1.1 gpm (4.1 lpm)
  • Max rated orifice size 0.015 in (0.38 mm)
  • Single piston, dual plunger intensifier with
    tie rod design
  • Motor output: 50 hp (37 kw)

HERO 50+

HERO 50+ 

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The HERO 50+ Waterjet Intensifier Pump, with Jet Smart+ Controls takes the best of the HERO 50 and doubles down with a host of additional premium features including a Soft Start Motor Starter, Light Stack with audible warning, electronic hydraulic pressure control, check tube sensors, bleed down sensor and auto leakage sensor.

Jet Edge allows you to Custom Configure your Intensifier Pump to match your unique application with the best value. If you require an engineering analysis to proof your processing goals, request a Free Application Analysis.

Jet Smart+ Controls make the user interface simple.  Quickly set pump pressures, visualize intensifier cycles, receive performance feedback in real time and receive prompts for scheduled maintenance.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 1.1 gpm (4.1 lpm)
  • Max rated orifice size 0.015 in (0.38 mm)
  • Single piston, dual plunger intensifier with
    tie rod design
  • Motor output: 50 hp (37 kw)

Jet Start 510A

JET START 510A

MID RAIL ABRASIVE WATERJET

with HERO 50 Intensifier Pump

The Jet Start 510A takes the no-nonsense workhorse 3-axis, 5′ x 10′ motion system and pairs it with Jet Edge’s HERO 50 intensifier pump that is loaded with features including Jet Smart controls. The result is an Abrasive Waterjet system capable of cutting complex parts from virtually any material with ultra-high precision. Jet Start your waterjet cutting operation with a Jet Start 510A Mid Rail Abrasive Waterjet system.

The Jet Start 510A waterjet cutting system includes a 3-axis abrasive cutting Z carriage, a rugged 5′ x 10′ isolated catcher tank, Jet Edge’s HERO 50 Intensifier Pump with Jet Smart Controls, IGEMS Software, an 800lb solid phase bulk hopper all with installation and training included.

  • Aquavision Di Controller for Windows 10
  • IGEMS Software with Nesting Program Upgrade
  • Motorized Z carriage for 12″ (304 mm) vertical travel height
  • Isolated Abrasive Catch Tank with Slat Kit
  • Full Featured Handheld Pendant
  • HERO 50 60k psi 50 hp intensifier pump
  • Remote Pump Start
  • 800lb Solid Phase Bulk Hopper
  • Installation and Training included

Jet Start 510A5

JET START 510A5

MID RAIL ABRASIVE WATERJET

with HERO 50 Intensifier Pump

The Jet Start 510A5, 5-axis motion system launches you into complex, contoured cutting right from the start. Cut near-net shapes with edges beveled up to 60° with no taper in tough materials like stainless steel, Inconel, and titanium with no heat affected zone.

The Jet Start 510A5 package includes a 5-axis abrasive cutting Z carriage, a rugged 5′ x 10′ isolated catcher tank, Jet Edge’s HERO 50 Intensifier Pump with Jet Smart Controls, IGEMS Software, an 800lb solid phase bulk hopper all with installation and training included.

  • Aquavision Di Controller for Windows 10
  • IGEMS Software with Nesting Program Upgrade
  • Servoed Z Package
  • Isolated Abrasive Catch Tank with Slat Kit
  • Full Featured Handheld Pendant
  • HERO 50 60k psi 50 hp intensifier pump
  • Remote Pump Start
  • 800lb Solid Phase Bulk Hopper
  • Installation and Training included

Permalign V-Series Mini Hopper

PERMALIGN® V-SERIES

MINI HOPPER

Quickly Adjust Garnet Flow

The variable aperture Permalign® V-Series Mini Hopper increases abrasive waterjet cutting productivity and profitability by allowing waterjet operators to easily make adjustments to abrasive flow, minimizing abrasive consumption. Its water resistant design helps prevent abrasive clogs that can cause stoppages and scrap out expensive material.

  • Infinite adjustment between .10 and 2 pounds per minute (45.4-907 gpm)
  • Water resistant
  • Improved venting of excess abrasive
  • Built for the harsh abrasivejet environment

Contact Height Sensor

JET EDGE

CONTACT HEIGHT SENSOR

Overcome Fluctuations in Material Flatness

Jet Edge’s Contact Height Sensor contacts the work piece and senses nozzle height to assure consistent cut quality and optimum speed. The sensor arm can either ride on the plate or have infinite programming for the time it is in contact and raised. Jet Edge’s AquaVision® Di controller software also provides feature avoidance for the Contact Height Sensor. This protects the height sensor and cutting head by automatically providing a tool path that will not allow the cutting head to pass over a previously cut part which can tip up after being cut.

  • Linear Potentiometer
  • Double-acting pneumatic cylinder 2 inch (50 mm) stroke
  • Contact force 2 lbf (0.9 kg)
  • Feature avoidance

In-Line Waterjet Chiller

IN-LINE

CHILLERS

The Workhorse Chiller

In-Line Chillers, used in conjunction with the Closed Loop Filtration System, cool treated water and return it to the high-pressure pumps at the recommended temperature. The chillers utilize durable, welded hermetic-scroll compressors and are equipped with digital temperature controllers. Models include a vertical air discharge which minimizes worker discomfort, reduces floor space requirements, and improves the ease of ducting air flow.

  • Available in 36,000-240,000 BTU
  • Small footprint with vertical air discharge
  • Up to 60 gallons per minute flow rate
  • Eliminates need for a drain

Waterjet Abrasive Removal System

WATERJET ABRASIVE

REMOVAL SYSTEM

Reduces Downtime and Catch Tank Maintenance

Jet Edge’s Abrasive Removal System reduces downtime and catch tank maintenance, making your application a cut above the rest. The system removes spent garnet abrasive and the self-dumping hopper receives the sludge so the clean water can be returned to the catch tank. No more manually removing abrasive from your tank—let a Jet Edge Abrasive Removal System do the work.

  • Removes spent garnet from catch tank
  • Multiple system configuration options to match your output
  • Reduces possible thermal distortion
  • System can be retrofitted to any waterjet cutting machine tool