Showing all 14 results

Hero100 Image - Jet Edge (black) 500x500Jet Smart Controls (500x500) - Jet Edge Waterjets
Read more

HERO 100

HERO 100 

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The HERO 100 Waterjet Intensifier Pump, with Jet Smart Controls provides the power to drive greater water volumes at Ultra High Pressure. Teamed with a Jet Edge motion system, multiple cutting heads can be configured for both waterjet cutting and abrasive waterjet cutting.

Jet Edge allows you to Custom Configure your Intensifier Pump to match your unique application with the best value. If you require an engineering analysis to proof your processing goals, request a  Free Application Analysis.

Jet Smart Controls make the user interface simple. Quickly set pump pressures, visualize intensifier cycles, receive performance feedback in real time and receive prompts for scheduled maintenance.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 2.1 gpm (7.9 lpm)
  • Max rated orifice size 0.020 in (0.51 mm)
  • Two single piston, dual plunger intensifiers
    with tie rod design
  • Motor output: 100 hp (75 kw)

Hero100+ Image - Jet Edge (black) 500x500Jet Smart Controls (500x500) - Jet Edge Waterjets
Read more

HERO 100+

HERO 100+ 

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The HERO 100+ Waterjet Intensifier Pump, provides the power to drive greater water volumes at Ultra High Pressure utilizing Jet Smart+ Controls.  By adding the plus, a host of additional premium features including a Soft Start Motor Starter, Light Stack with audible warning, electronic hydraulic pressure control, check tube sensors, bleed down sensor and auto leakage sensor. Teamed with a Jet Edge motion system, multiple cutting heads can be configured for both waterjet cutting and abrasive waterjet cutting.

Jet Edge allows you to Custom Configure your Intensifier Pump to match your unique application with the best value. If you require an engineering analysis to proof your processing goals, request a Free Application Analysis.

Jet Smart+ Controls make the user interface simple.  Quickly set pump pressures, visualize intensifier cycles, receive performance feedback in real time and receive prompts for scheduled maintenance.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 2.1 gpm (7.9 lpm)
  • Max rated orifice size 0.020 in (0.51 mm)
  • Two single piston, dual plunger intensifier with
    tie rod design
  • Motor output: 100 hp (75 kw)

Hero 150 (500x500) - Jet Edge Waterjets (2)Jet Smart Controls (500x500) - Jet Edge Waterjets
Read more

Hero 150

HERO 150 

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The HERO 150 Waterjet Intensifier Pump, with Jet Smart Controls is the brute that the name suggests.  With two intensifiers delivering an industry leading 3 gallons per minute of high pressure water, nothing stands in its way. Whether its driving one or even two Jet Edge motion systems, incorporated into cleaning cells, or used for powering multiple abrasive cutting heads on the same system it won’t let you down.

Jet Edge allows you to Custom Configure your Intensifier Pump to match your unique application with the best value. If you require an engineering analysis to proof your processing goals, request a Free Application Analysis.

Jet Smart Controls make the user interface simple. Quickly set pump pressures, visualize intensifier cycles, receive performance feedback in real time and receive prompts for scheduled maintenance.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 3.2 gpm (12.1 lpm)
  • Max rated orifice size 0.025 in (.64 mm)
  • Motor output 150 hp (112 kw)
  • Two single piston, dual plunger intensifiers
    with tie rod design
  • Motor output 150 hp (112 kw)

Hero 150+ (500x500) - Jet Edge WaterjetsJet Smart Controls (500x500) - Jet Edge Waterjets
Read more

Hero 150+

HERO 150+

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The HERO 150+ Waterjet Intensifier Pump, with Jet Smart+ Controls is the pinnacle of UHP Intensifier Pump technology, featuring the power of a 150hp motor and the finesse of advanced controls.  Its two intensifiers deliver an industry leading 3 gallons per minute of high pressure water. Whether its driving one or even two Jet Edge motion systems, incorporated into cleaning cells, or used for powering multiple abrasive cutting heads on the same system it won’t let you down.

Jet Edge allows you to Custom Configure your Intensifier Pump to match your unique application with the best value. If you require an engineering analysis to proof your processing goals, request a Free Application Analysis.

Jet Smart Controls make the user interface simple. Quickly set pump pressures, visualize intensifier cycles, receive performance feedback in real time and receive prompts for scheduled maintenance.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 3.2 gpm (12.1 lpm)
  • Max rated orifice size 0.025 in (.64 mm)
  • Motor output 150 hp (112 kw)
  • Two single piston, dual plunger intensifiers
    with tie rod design
  • Motor output 150 hp (112 kw)

Hero50 Image - Jet Edge (black) 500x500Jet Smart Controls (500x500) - Jet Edge Waterjets
Read more

HERO 50

HERO 50 

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The HERO 50 Waterjet Intensifier Pump, with Jet Smart Controls sets a new performance standard for UHP Intensifier Pumps. Dependable and easy to maintain, the HERO 50 can cut and trim a large array of materials including heat sensitive metals, delicate foams, and tough substances like granite and glass.

Jet Edge allows you to Custom Configure your Intensifier Pump to match your unique application with the best value. If you require an engineering analysis to proof your processing goals, request a Free Application Analysis.

Jet Smart Controls make the user interface simple. Quickly set pump pressures, visualize intensifier cycles, receive performance feedback in real time and receive prompts for scheduled maintenance.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 1.1 gpm (4.1 lpm)
  • Max rated orifice size 0.015 in (0.38 mm)
  • Single piston, dual plunger intensifier with
    tie rod design
  • Motor output: 50 hp (37 kw)

Hero50+ Image - Jet Edge (black) 500x500Jet Smart Controls (500x500) - Jet Edge Waterjets
Read more

HERO 50+

HERO 50+ 

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The HERO 50+ Waterjet Intensifier Pump, with Jet Smart+ Controls takes the best of the HERO 50 and doubles down with a host of additional premium features including a Soft Start Motor Starter, Light Stack with audible warning, electronic hydraulic pressure control, check tube sensors, bleed down sensor and auto leakage sensor.

Jet Edge allows you to Custom Configure your Intensifier Pump to match your unique application with the best value. If you require an engineering analysis to proof your processing goals, request a Free Application Analysis.

Jet Smart+ Controls make the user interface simple.  Quickly set pump pressures, visualize intensifier cycles, receive performance feedback in real time and receive prompts for scheduled maintenance.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 1.1 gpm (4.1 lpm)
  • Max rated orifice size 0.015 in (0.38 mm)
  • Single piston, dual plunger intensifier with
    tie rod design
  • Motor output: 50 hp (37 kw)

X90-100 500
Read more

XP90-100 Waterjet Intensifier Pump

XP90-100 

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The XP90-100 X-Stream Waterjet Pump is backed by nearly 10 years of extensive research and development in hyperpressure technology. It typically reduces taper by up to 0.001”. This pump supports a 75,000 psi continuous operating pressure, capable of producing flow rates of 1.41 gpm and supports up to a .015” orifice—increasing productivity for a diverse range of materials.

  • Rated pressure: 90,000 psi (6,200 bar)
  • UHP flow rate: 1.41 gpm (5.3 lpm)
  • Max rated orifice size .015 in (.38 mm)
  • Single piston, dual plunger, reciprocating pump
  • Motor output: 100 hp (75 kw)
X90-50 500
Read more

XP90-50 Waterjet Intensifier Pump

XP90-50

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The XP90-50 X-Stream Waterjet Pump is backed by nearly 10 years of extensive research and development in hyper-pressure technology. Its fittings and tubings are rated for 100,000 psi. This pump supports a 75,000 psi continuous operating pressure, capable of producing flow rates of .7 gpm and supports up to a .011” orifice—increasing productivity for a diverse range of materials.

  • Rated pressure: 90,000 psi (6,200 bar)
  • UHP flow rate: .70 gpm (2.61 lpm)
  • Max rated orifice size .011 in (.28 mm)
  • Single piston, dual plunger reciprocating pump
  • Motor output: 50 hp (37 kw)
IP60-200 Waterjet Intensifier Pump - Jet Edge Waterjet Systems
Read more

IP60-200 Waterjet Intensifier Pump

IP60-200

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

When you need high pressure and high gpm flow rates for your cutting or specialty application this is the answer.  Visit our Case Study Library to learn how innovative users use pump technology for Burst Testing, Nuclear Reactor Peening, Robotic Aircraft Engine Parts Cleaning and Textile Trimming.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 4.0 gpm (15.2 lpm)
  • Max rated orifice size .028 in (.71 mm)
  • Single piston, dual plunger, reciprocating pump
  • Motor output: 200 hp (149 kw)
IP60-75 Waterjet Intensifier Pump - Waterjet Pump - Jet Edge Waterjets
Read more

IP60-75 Waterjet Intensifier Pump

IP60-75

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The IP60-75 is our straight-to-the-point waterjet. You’ll be able to cut your application’s material and time spent on the job. It is perfect for moderately intense cutting projects. With the ability to run three 0.010″/0.030″ orifice/nozzle combinations, a 1.5 gpm flow rate, and a dynamic pressure of 55,000 psi, this pump will not let your application down.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 1.5 gpm (5.7 lpm)
  • Max rated orifice size .018 in (.46 mm)
  • Single piston, dual plunger, reciprocating pump
  • Motor output: 75 hp (56 kw)
IP60-30 Waterjet Intensifier Pump -Waterjet Pump - Jet Edge Waterjets
Read more

IP60-30 Waterjet Intensifier Pump

IP60-30 – I’M RETIRED

But don’t worry! We continue to support you.
See our upgraded model, the HERO 50 with Jet Smart controls.

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The IP60-30 is designed for shops that desire the reliability of a hydraulic intensifier pump, but have limited power. This pump is capable of producing 0.6 gpm (2.3 lpm) of UHP water at a continuous operating pressure of 55,000 psi. It includes a hydraulic accumulator to provide smoother hydraulic pressure, reduce spikes, and prolong hydraulic pump life.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 0.6 gpm (2.3 lpm)
  • Max rated orifice size .010 in (.25 mm)
  • Single piston, dual plunger, reciprocating pump
  • Motor output: 30 hp (22 kw)
IP60-50 Waterjet Intensifier Pump - Waterjet Pump - Jet Edge
Read more

IP60-50 Waterjet Intensifier Pump

IP60-50 – I’M RETIRED

But don’t worry! We continue to support you.
See our upgraded model, the HERO 50 with Jet Smart controls.

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The IP60-50 Waterjet Intensifier Pump is your intro to pumps. Dependable and easy to maintain, it has the ability to cut and trim a large array of materials including heatsensitive, delicate, and tough substances. This Intensifier Pump is perfect for robotic, mobile, and motion system cutting applications. Jet Edge can provide an engineering analysis and customized solution to meet your application needs.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 1.0 gpm (3.7 lpm)
  • Max rated orifice size: 0.015 in (0.38 mm)
  • Single piston, dual plunger intensifier with tie rod design
  • Motor output: 50 hp (37 kw)
IP60-100 Waterjet Intensifier Pump - Waterjet Pump - Jet Edge Waterjets
Read more

IP60-100 Waterjet Intensifier Pump

IP60-100

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The IP60-100 Waterjet Intensifier Pump has a reliable tie-rod design that eliminates threads on the high pressure cylinders, end caps, and hydraulic cylinders—reducing the likelihood of cracking and increases component life. The dual intensifier and optional controls package make this the most versatile pump on the market. Jet Edge can provide customized solutions with a complete engineering analysis of your application.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 2.0 gpm (7.6 lpm)
  • Max rated orifice size .021 in (.53 mm)
  • Single piston, dual plunger, reciprocating pump
  • Motor output: 100 hp (75 kw)
IP60-150 Waterjet Intensifier Pump - Jet Edge
Read more

IP60-150 Waterjet Intensifier Pump

IP60-150

WATERJET INTENSIFIER PUMP

High Velocity Stream of Ultra High Pressure Water

The IP60-150 reigns supreme and provides thicker, better and tougher cutting solutions. Packed with power, this intensifier pump is capable of running multiple cutting heads with high abrasive content for high speed, high finish accuracy. This is the pump of choice for large table cutting, surface preparation applications and mobile cutting. Contact Jet Edge for custom solutions and a full engineering analysis of your application.

  • Rated pressure: 60,000 psi (4,100 bar)
  • UHP flow rate: 3.0 gpm (11.4 lpm)
  • Max rated orifice size .025 in (.64 mm)
  • Single piston, dual plunger, reciprocating pump
  • Motor output: 150 hp (112 kw)