Hero50 Image - Jet Edge (black) 500x500

Edge Dual Carriage Mid Rail Waterjet

EDGE DUAL CARRIAGE

MID RAIL WATERJET

with Aquavision DI Controller

The Edge Dual Carriage waterjet cutting machine is for those who demand both accuracy and productivity from their investment. The dual Z carriages operate independently so they can be programmed to double team a single part or cut two like parts simultaneously. Boasting ±0.001″ linear positional accuracy over 12″ (304 mm) per axis, ±0.001″ repeatability (bidirectional) and ±0.003″ renishaw ballbar tests of squareness and straightness over 24″ (608 mm), means never giving up on precision again.

  • Specify 3-axis cutting heads, 5-axis cutting heads or one of each
  • Independently driven, dual Z carriages can cut a single part together or two like parts simultaneously
  • 5-axis cutting head can cut bevels to 60° and eliminate tapers
  • Programable Z carriage with servo motor driven 12″ (304 mm) vertical travel height
  • Multiple accessory options to further increase productivity
  • Isolated catch tank for the highest precision
  • Adjustable pre-loaded anti-backlash recirculating ball screws
  • Protected critical bearing components with labyrinth seals and positive air pressure
  • Technical service and free lifetime factory training
Category:

Description

CONTROLS/ACCURACY

  • Aquavision DI fully networkable, industrial PC controller
  • Dual Z Carriages are independently programmable
  • 5-axis cutting head cuts bevels to 60° taper free mounted to a servo motor driven Z carriage with 12″ (304 mm) vertical travel height
  • 3-axis cutting head mounted to a motorized Z carriage with 12″ (304 mm) vertical travel height
  • IGEMS CAD/CAM programming software
  • Digital readout for multi-head positioning
  • Full visibility and access to machine code
  • Isolated catch tank for high precision cutting
  • Full-featured hand-held pendant
  • Precision ball screws directly coupled to servo motors
  • ±0.001″ linear positional accuracy over 12″ (304 mm) per axis
  • ±0.001″ repeatability (bidirectional)
  • ±0.003″ renishaw ballbar tests of squareness and straightness over 24″ (608 mm)

CONFIGURATION OPTIONS

  • Specify two 3-axis or two 5-axis cutting heads or one of each
  • 3-axis cutting heads mounted to servo driven Z carriage for vertical travel height control
  • IGEMS Nesting Software with common line cut capabilities
  • Lights-out cutting package for unattended operation
  • High pressure water monitor and abrasive delivery monitor
  • Laser surface mapping
  • Contact height sensor
  • Noise reduction with underwater cutting options
  • Stainless steel catcher tank and slat kits
  • Splash shields
  • Light curtains

WARRANTY

  • 1-year or 2,000-hour pump warranty
  • Extended warranties available.
  • Lifetime factory training

Related products